HIH-4602-A/c series humidity sensors description HIH-4602-A/c series relative humidity (rh) sensors combine both relative humidity and temperature sensing in a to-5 housing with a hydrophobic sintered stainless steel filter. the laser-trimmed, thermoset polymer capacitive sensing elements have on-chip integrated signal conditioning. the temperature sensor is thermally connected with the rh sensor making the HIH-4602-A/c often ideal for measuring dew point and other absolute moisture terms. the HIH-4602-A contains an integral thermistor, while the hih- 4602-c contains an integral precision rtd. factory calibration data supplied with each sensor allows individually matched downstream electronics and 3.5 %rh total accuracy. features ? near linear voltage output vs %rh ? laser-trimmed interchangeability ? enhanced accuracy, fast response ? chemically resistant ? stable, low drift performance ? built-in static protection ? often ideal for dew point and absolute moisture measurements ? to-5 housing potential applications ? refrigeration ? drying ? meteorology ? battery-powered systems ? oem (original equipment manufacturer) assemblies
HIH-4602-A/c series 2 www.honeywell.com/sensing table 1. performance specificat ions (at 5 vdc supply and 25 o c [77 o f] unless otherwise noted.) parameter minimum typical maximum unit specific note interchangeability (first order curve) ? ? ? ? ? 0% rh to 59% rh -5 ? 5 % rh ? 60% rh to 100% rh -8 ? 8 % rh ? accuracy (best fit straight line) -3.5 ? +3.5 % rh 1 hysterisis ? 3 ? % rh ? repeatability ? 0.5 ? % rh ? settling time ? ? 70 ms ? response time (1/e in slow moving air) ? 50 ? s ? stability (at 50% rh in one year) ? 1.2 ? % rh ? voltage supply 4 ? 5.8 vdc ? current supply ? 200 500 a ? output voltage temp. coefficient at 50% rh, 5 v ? -4 ? mv/ o c ? voltage output (1st order curve fit) v out =(v supply )(0.0062(sensor rh) + 0.16), typical at 25 o c temperature compensation true rh = (sensor rh)/(1.0546-0.00216t), t in o c operating temperature -40[-4 0] see figure 1. 85[185] o c[ o f] ? operating humidity 0 see figure 1. 100 % rh 2 storage temperature -50[-58] ? 125[257] o c[ o f] ? storage humidity see figure 2. % rh 2 specific notes: 1. device is calibrated at 5 vdc and 25 o c. 2. non-condensing environment. general notes: ? sensor is ratiometric to supply voltage. ? extended exposure to > 90% rh causes a reversible shift of 3% rh. ? sensor is light sensitive. for best performance, shield sensor from bright light. factory calibration data hih-4602 sensors are supplied with a calibration and data printout. see table 2. table 2. example data printout model hih-4602-c channel 92 wafer 030996m mrp 337313 calculated values at 5 v v out at 0% rh v out at 75.3% rh 0.826 v 3.198 v linear output for 3.5% rh accuracy at 25 c zero offset slope rh 0.826 v 31.483 mv/%rh (v out - zero offset)/slope (v out - 0.826)/0.0315 ratiometric response for 0% rh to 100% rh v out v supply (0.1652 to 0.7952) table 3. HIH-4602-A ntc thermistor temperature specifictions rb = 100 kohm 5% at 25 o c beta = 4250, 25 o c to 85 o c 1/t = a + b(ln r) + c(ln r) ^ 3, t in degrees k low mid high temp. o c 0 50 100 resistance 351000 33590 5569 a = 0.000828083 b = 0.000208691 c = 8.0812e-08 table 4. hih-4602-c rtd temperature sensor specifications thin film platinum rtd ? class 2b (ro: 0.25%) din en 60571 (per iec 751) tcr = 3750 ppm/ o c 1000 ohm at 0 o c [32 o f]
humidity sensors honeywell sensing and control 3 figure 1. operating environment (non-condensing environment.) figure 2. storage environment (non-condensing environment.)
HIH-4602-A/c series 4 www.honeywell.com/sensing figure 3. typical output voltage vs relative humidity (at 25 oc and 5 v.) 0.5 1 1.5 2 2.5 3 3.5 4 0 20406080100 relative humidity (%rh) output voltage (vdc) sensor response sensor response best linear fit figure 4. typical output voltage (bfsl) vs relative humidity (at 0 oc, 7 0 oc and 5 v.) 0 0.5 1 1.5 2 2.5 3 3.5 4 4.5 0 102030405060708090100 relative humidity (%) output voltage (vdc) 0 c 70 c
humidity sensors honeywell sensing and control 5 figure 5. HIH-4602-A/c 1mounting dimensions (for reference only. mm/[in]) 1. case ground 2. vdc out 3. (-) power or ground 4. (+) vdc supply 5., 6. HIH-4602-A thermistor for temperature compensation 5., 6. hih-4602-c rtd for temperature compensation figure 6. rh sensor construction sensor construction consists of a planar capacitor with a sec ond polymer layer to protect against dirt, dust, oils and other ha zards.
HIH-4602-A/c series 6 www.honeywell.com/sensing figure 7. typical application circuit order guide catalog listing description HIH-4602-A monolithic ic humidity sensor with integral thermistor in to-5 can hih-4602-c monolithic ic humidity sensor with integral precision rtd in to-5 can further humidity sensor information see the following associated literature at www.honeywell.c om/sensing : ? product installation instructions ? application sheets: ? humidity sensor performance characteristics ? humidity sensor theory and behavior ? humidity sensor moisture and psychrometrics ? thermoset polymer-based capacitive sensors
humidity sensors honeywell sensing and control 7 this page intentionally left blank..
automation and control solutions sensing and control honeywell 1985 douglas drive north minneapolis, mn 55422 www.honeywe ll.com/sensing 009022-1-en il50 glo printed in usa january 2007 ? 2007 honeywell international inc. all rights reserved. warning misuse of documentation ? the information presented in this product sheet is for reference only. do not use this document as a product installation guide. ? complete installation, operation, and maintenance information is provided in the instructions supplied with each product. failure to comply with these instructions could result in death or serious injury. warranty/remedy honeywell warrants goods of its manufacture as being free of defective materials and faulty workmanship. honeywell?s standard product warranty applies unless agreed to otherwise by honeywell in writing; please refer to your order acknowledgement or consult your local sales office for specific warranty details. if warranted goods are returned to honeywell during the period of coverage, honeywell will repair or replace, at its option, without charge those items it finds defective. the foregoing is buyer?s sole remedy and is in lieu of all other warranties, expressed or implied, including those of merchantability and fitness for a particular purpose. in no event shall honeywell be liable for consequential, special, or indirect damages. while we provide application assistance personally, through our literature and the honeywell web site, it is up to the customer to determine the suitability of the product in the application. specifications may change without notice. the information we supply is believed to be accurate and reliable as of this printing. however, we assume no responsibility for its use. warning personal injury do not use these products as safety or emergency stop devices or in any other application where failure of the product could result in personal injury. failure to comply with these instructions could result in death or serious injury. sales and service honeywell serves its customers through a worldwide network of sales offices, representatives and distributors. for application assistance, current specifications, pricing or name of the nearest authorized distributor, contact your local sales office or: e-mail: info.sc@honeywell.com internet: www.honeywell.com/sensing phone and fax: asia pacific +65 6355-2828 +65 6445-3033 fax europe +44 (0) 1698 481481 +44 (0) 1698 481676 fax latin america +1-305-805-8188 +1-305-883-8257 fax usa/canada +1-800-537-6945 +1-815-235-6847 +1-815-235-6545 fax
|
